The drinking water system includes bottled purified water, bottled mineral water, bottled mountain spring water, barreled purified water, barreled mountain spring water (drinking packaged water), etc. Each process is slightly different, and the water used can come from spring water, well water, pure water, tap water and even municipal water supply. With the current aggravation of environmental pollution, the quality of raw water is not as good as before, and people’s

Soft drinks refer to beverage products with ethanol content not exceeding 0.5% by mass fraction, which are packaged in quantitative packaging for direct drinking or drinking by mixing with water, excluding drinking medicine. Their main raw materials are drinking water or mineral water, fruit juice, vegetable juice or plant roots, stems, leaves, flowers and extracts of fruits, some also contain sweeteners, sour agents

Wine is an alcoholic beverage fermented from fresh grapes or grape juice, usually divided into red wine and white wine. The former is made by dipping and fermenting red grapes with their skins; the latter is made by fermentation of grape juice.
The wine-making process can be divided into two parts. The first part is fermentation, that is, the process of turning grape juice into wine.

Chemical industry is one of the most dynamic emerging fields in the chemical industry today, and is an important part of new materials. Fine chemical products variety, high added value and wide application, the industrial connection, direct service industries of national economy and the areas of high and new technology industry.

The effective and reliable separation and filtration of various raw materials, intermediate products and recycle process liquids are essential for improving the final product quality and durability. Petrochemical processes are very sensitive to contaminants. Impurities such as water and particles directly affect every step of the process, leading to an increase in machine maintenance frequency, resulting in downtime, significant losses, and significantly impacting final product quality. 

Beer is a kind of low-alcohol beverage full of carbon dioxide brewed by yeast fermentation, which is mainly made of malt, hops and water. The production process of beer is divided into several processes such as malt production, wort production, pre-fermentation, post-fermentation (also known as maturation), filtration sterilization and packaging. According to the industry development and consumer demand, it is mainly divided into: pasteurized beer, draft beer or fresh beer.

Dairy products are solid or liquid products made of milk, goat’s milk and other raw materials by heating, fermenting, drying or mixing other substances. Dairy products contain a large number of nutrients easily absorbed by human body, known as “health industry”. With the continuous progress and development of dairy processing technology, various types of dairy products have gradually appeared in people’s vision, so that the public can choose according to their own tastes, hobbies and needs.

The press is one of the most commonly equipment in automobile manufacturing. In the assembly plant, presses process sheet metal into complex geometries parts, such as hoods, fenders or door panels. Stamping machines are typically characterized by hydraulic and process filter applications that affect stamping machine reliability and the stamping surface finish quality.

In automotive, there are fluid cleanliness specifications for engine oil, automatic transmission fluids, coolants and diesel fuels. These automotive fluid filtration specifications are strict to avoid adding any cross-contamination to the assembled cleaning system before dynamic testing.As all one-way systems, filling lines require a sophisticated filtration solution.

The pulp and paper industry requires a comprehensive approach to process optimization. Increasing the fluid process reliability and availability to reduce total operating costs, and can make your paper process more productive. The improved demands for water and energy, expectations for quality and productivity, high-tech products and processes, as well as increasing regulations and rising living standards,

Automotive coating processes is an important process during automotive manufacture. It is generally divided into metallic surface treatment and coating process. Surface treatment focuses on the removal of oil, dust, rust and the old paint layer to improve the surface condition. Adhesive surface impurities are removed through pre-degreasing and degreasing processes, with the washing liquid being reused after liquid filtration and separation processes.

Controlling particles in hydraulic fluids is critical, because clean hydraulic fluid is the most important part of any fluid power system. This is why effective hydraulic oil filtration is crucial. Particles reduce efficiency and can damage equipment, which is why companies invest in filtration systems to maintain the cleanliness of hydraulic fluids.

Photolithography technology refers to the technology of transferring the pattern on the mask plate to the substrate with the help of photoresist under the action of light (generally ultraviolet light, deep ultraviolet light, extreme ultraviolet light). The photolithography technology is one of the most important processes in semiconductor manufacturing.

One of the biggest challenges facing semiconductor manufacturing is surface contamination of silicon wafers. Studies have shown that defects brought about by contamination cause up to 80% of the electrical failures in chips. If there are contaminants in the wafer manufacturing process that are not completely removed, it will affect the yield of the wafers, and cause a whole wafer or even batches of wafers to be scrapped.

Ultra-clean and high purity reagents used in the microelectronics industry are commonly known as process chemicals internationally, and are called wet chemicals in the United States, Europe and Taiwan, China. They are one of the indispensable chemical materials in the process of micro-fabrication of electronic technology and are used for chip cleaning and etching.

Chemical Mechanical Planarization(CMP) is a polishing technology used to manufacture semiconductor industrial wafers and is a technology in semiconductor device manufacturing process. It uses chemical corrosion and mechanical force to planarize silicon wafers or other substrate materials during machining. Chemical mechanical polishing solutions improve the process of creating multi-layer semiconductor circuits. Among them, the chemical polishing paste we generally called grinding liquid slurry.

The main technologies of flat panel display include: liquid crystal display (LCD, generally divided into TN/STN/TFT three types), plasma display (PDP), organic light emitting diode display (OLED), field emission display. Among them, TFT-LCD is the current mainstream flat panel display, and its process is relatively mature. Taking the whole process of TFT-LCD as an example, it is subdivided into: array technology, color film (CF technology), cell technology and module technology.

Lubricating oil filtration is a key element in the efficient operation and maintenance of large engines, compressors and other equipment in refineries. Inefficient filtration cannot meet the requirements of oil use, and poor quality and instability of oil will lead to system emergency repairs and downtime at short intervals, resulting in mechanical damage and high maintenance costs.

Completion fluids are used in the drilling area before drilling, and well servicing fluids are used to repair the well during production. All of these fluids need to be clean to avoid blocking the reservoir. Both completion and well servicing fluids are used to clean the well, remove cuttings, mud cake, cement, and control the sand carried during oil delivery. The purpose of the filter system is to trap impurities in the fluid and allow the clean liquid to return to the well.

The natural gas acquisition system through pipes to deliver a large amount of gas to the inlet of natural gas processing equipment. In order to ensure the follow-up process smooth, the separation of solid impurities and residual liquids in the inlet gas is a critical first step.Iron oxide, iron sulfide, dust and a large number of deformable particles suspended in natural gas will be directly transferred to the natural gas treatment system.

The medicine preparations are made according to certain dosage from requirements in order to meet the needs of treatment or prevention, and can be finally provided to the drug subject for use. Common ones include large volume parenteral, small volume parenteral , lyophilized powder injections, eye drops and so on.

Biopharmaceuticals refers to drugs used for the prevention, treatment and diagnosis of human diseases by biological materials such as microorganisms, cells, tissues and liquid of various animals and human origin, which is obtained through genetic engineering, cell engineering, protein engineering, fermentation engineering and other biotechnology.

Active Pharmaceutical Ingredients refer to the raw materials used in the production of various preparations. They are active ingredients in the preparations, and they are a variety of powders, crystals and extracts prepared by chemical synthesis, plant extraction or biotechnology that are used as medicinal substances, but cannot be directly taken by patients.

The water, gas and steam used in the production need to meet the cleanliness requirements of pharmaceutical process, GMP and the corresponding guidelines and regulations, and they play a key role in ensuring product quality and requirements of sanitary grade product. The pharmaceutical industry water systems in the bio-pharmaceutical industry are all required to undergo special treatment, mainly including purified water, water for injection, sterile water for injection, etc